I am pulling the 283 out of my 65 and putting in a 350... will I have to swap the bell housing too. Also, the 350 is coming from a 79 Chevy 3/4 ton that has power steering... I noticed the frame for the 65 is already "predrilled" for bolting on the gear box from the 79. By predrilled I mean that there are already holes in the frame that would make it very easy to bolt on the other gear box or at least it seems to be very close anyways. I have looked over both set ups very closely and I am wondering if the gear box from a 79 would easily swap out and if so, do I have to make any mods beyond that point in order to get power steering on my 65.

Thanks

Boogity, Boogity, Boogity Let's go racin boys.
Drive fast, turn left. GO #20.

Real trucks where bowties.