I have been doing alot of research on my problem of adjusting the clutch on my t5. I looked at my 39 shop manual and it shows one nut on each side of the clutch fork. I looked online at the 42 shop manual and it shows the 2 nuts on one side of the clutch fork. Could it be that because I am using a 42-46 bell housing that i need to set the adjusting nuts up to correspond to that bell housing and not how it was on my 39 bell housing?

thanks

Matt

http://www.flickr.com/photos/50657267@N08/sets/

1939 1/2 ton Resto-mod
1937 1 1/2 ton Is in the driveway