I'm using a 1991 GMC transfer case - It has a driver side front drive shaft output for the IFS system on those trucks. Actually that's the reason I got the FoMoCO front axle in the first place. A classic "cart before the horse" example!

I went to the junk yard and found a power steering setup off of an eighties Chevy and I'm going to mock it up soon. You're right though, - I'll have to mount it quite far forward and then run a link to the steering mounted to the axle. If I remember my steering set-up correctly, the pitman needs to pivot about the same place as the spring perch to avoid bump steer.

When I get this truck done, maybe I'll do a write-up and submit it with some pictures.

Thanks for the reply!

Craig

It is neither wealth nor splendor, but tranquility in occupation which brings happiness. - Thomas Jefferson

CK