| |
Labor Day Putting down your wrenches or time for
MORE wrenching? 
Plenty of places to share. | | Click on image for the lowdown. 
====
| | | Forums66 Topics128,010 Posts1,055,299 Members48,419 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Oct 2006 Posts: 119 Wrench Fetcher | | Wrench Fetcher Joined: Oct 2006 Posts: 119 | Here's what I did: I fabricated some 3/4" steel spacers to raise the mounts where they set in the frame. I also needed to fabricate a steel spacer between the mounting point on the transmission and the cross-member to shim something close to a good engine angle. I drove the truck for a while allowing the actual cross-member to float in the mounts. Bad idea. Once you get everything lined up, tack the cross member to the mounts and then take it out and weld them up. http://picasaweb.google.com/ChrisAurit/PhotoHistory#5377948050623832578 | | |
|
|
| |
