| |
Click on image for the lowdown. 
====
| | |
0 members (),
100
guests, and
2
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,157 Posts1,056,875 Members48,456 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Mar 2002 Posts: 9,115 'Bolter | | 'Bolter Joined: Mar 2002 Posts: 9,115 | Denny,
the shims I got from LMC were .006" thick! I can't remember who made them but it was a prominent name. I think someone read in the shop manual about starting out with .006" of shims and decided that is the thickness they should be. | | | |
Entire Thread
|  
Bearing Clearance, plastigage & Shims
| Kip's41 | 03/08/2010 2:43 AM | |
Re: Bearing Clearance, plastigage & Shims
| Hotrod Lincoln | 03/08/2010 4:06 AM | |
Re: Bearing Clearance, plastigage & Shims
| Denny Graham | 03/08/2010 3:52 PM | |
Re: Bearing Clearance, plastigage & Shims
| kingisomer | 03/08/2010 5:15 PM | |
Re: Bearing Clearance, plastigage & Shims
| Hotrod Lincoln | 03/08/2010 5:48 PM | |
Re: Bearing Clearance, plastigage & Shims
| Denny Graham | 03/08/2010 9:27 PM | |
Re: Bearing Clearance, plastigage & Shims
| Hotrod Lincoln | 03/08/2010 10:05 PM | |
Re: Bearing Clearance, plastigage & Shims
| truckernix | 03/09/2010 1:16 AM | |
Re: Bearing Clearance, plastigage & Shims
| Denny Graham | 03/09/2010 1:59 AM | |
Re: Bearing Clearance, plastigage & Shims
| Pete52 | 03/09/2010 2:14 AM | |
Re: Bearing Clearance, plastigage & Shims
| Kip's41 | 03/09/2010 4:58 PM | |
Re: Bearing Clearance, plastigage & Shims
| Kip's41 | 03/21/2010 3:07 AM | |
Re: Bearing Clearance, plastigage & Shims
| truckernix | 03/08/2010 9:27 PM | |
Re: Bearing Clearance, plastigage & Shims
| Denny Graham | 03/08/2010 9:56 PM | |
|
|
| |
