| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,024 Posts1,055,395 Members48,422 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#61565 06/09/2006 10:26 PM | Joined: Jun 2004 Posts: 8,597 Riding in the Passing Lane | | Riding in the Passing Lane Joined: Jun 2004 Posts: 8,597 | First make shure the pinion brgs. are snug. There should be no up & down play in the yoke. If thats ok pull the yoke & see if the srface the seal rides on is smooth. If not a Speede-sleeve is available to go over it. Pull the seal out. You may have damaged it putting it in or let the spring inside fall out. Install a new sealmakeing shure it is the right size. Put a little RTV on the splines of the yoke & the back of the nut. The nut is self locking. If it doesn,t go on tight get a new one. Don,t over tighten it.
They say money can't buy happiness. It can buy old Chevy trucks though. Same thing. 1972 Chevy c10 Cheyenne SuperIn the Gallery Forum | | |
|
|
| |
