The Stovebolt Site Forums The Shop Area General Truck Talk torque needed for new tapered wheel bearings

Help is a click away!

VEHICLE
INFORMATION
KITS

at the

GM Heritage Center
All the details are here.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

5 members (Otto Skorzeny, Shade Baby, DadsFirstPickup, greenie-reddy, Wayne67vert), 115 guests, and 0 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,147

Posts1,056,798

Members48,454

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Re: torque needed for new tapered wheel bearings joethehuman #606961 01/04/2010 4:15 AM
Joined: Jan 2008 Posts: 4,962 Fredericksburg, Texas C crenwelge 'Bolter
crenwelge 'Bolter C Joined: Jan 2008 Posts: 4,962 Fredericksburg, Texas	On later model vehicles, the drum pilots on the hub which is just as concentric as when the drum was riveted to the hub. Excessive drum runout has never been acceptable.

Entire Thread
Subject	Posted By	Posted
torque needed for new tapered wheel bearings	joethehuman	01/03/2010 8:05 PM
Re: torque needed for new tapered wheel bearings	Hotrod Lincoln	01/03/2010 8:54 PM
Re: torque needed for new tapered wheel bearings	OldSub	01/03/2010 9:10 PM
Re: torque needed for new tapered wheel bearings	51 john	01/03/2010 9:22 PM
Re: torque needed for new tapered wheel bearings	joethehuman	01/03/2010 9:47 PM
Re: torque needed for new tapered wheel bearings	Hotrod Lincoln	01/03/2010 10:57 PM
Re: torque needed for new tapered wheel bearings	joethehuman	01/03/2010 11:30 PM
Re: torque needed for new tapered wheel bearings	ErikDaViking	01/04/2010 12:47 AM
Re: torque needed for new tapered wheel bearings	Hotrod Lincoln	01/04/2010 1:12 AM
Re: torque needed for new tapered wheel bearings	joethehuman	01/04/2010 2:54 AM
Re: torque needed for new tapered wheel bearings	crenwelge	01/04/2010 4:15 AM
Re: torque needed for new tapered wheel bearings	joethehuman	01/04/2010 6:08 PM
Re: torque needed for new tapered wheel bearings	crenwelge	01/04/2010 8:04 PM

Moderated by Gdads51

Hop To

Link Copied to Clipboard