| |
Click on image for the lowdown. 
====
| | |
0 members (),
52
guests, and
0
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,050 Posts1,055,643 Members48,426 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Apr 2009 Posts: 554 'Bolter | | 'Bolter Joined: Apr 2009 Posts: 554 | I have been spray painting various projects for almost 50 years (on a very sporadic basis) using all kinds of equipment. I have not attempted painting the exterior of a car since the infamous "sharkskin" effect I got 44 years ago. I am still very much a novice. I bought a HVLP 3 gun set made by Vaper/Titan Tools a few years ago. They worked okay on a couple of tractors I restored but I was not completely satisfied with the results. I wrote it off to my lack of experience/knowledge.
I plan to have a professional spray the exterior panels on my 52 but I am painting everything else. No matter how I have tried to adjust the Vaper gun my finishes have such severe orange peel they look like someone hammered a hammered finish. Finally decided it may not be me and I bought a Devilbiss Finishline 3 gun- referred to by many as a lower end acceptable gun.
The difference is absolutely amazing. I am very pleased with the finish I got. I am posting this in case any other novices wonder if it is worth spending some extra money for a better quality gun. In my experience it really is worthwhile, even if you are not much of a painter. In fact it may be even more important if you are not a great painter.
Chuck
| | |
|
|
| |
