Great. I get to remove my radiator. I really wish I did this when my engine bay was nice and empty. Well, maybe I should tear into it and try and get my fenders lined up at least. I'll work on the hood too, but won't be able to really get it right until I buy those new hinges.
So if I understand correctly, I need to loosen all bolts holding the front clip pieces forward of the firewall, remove my radiator and loosen the center bolt. Then line everything up using spacers and fender washers as needed, then tighten the center bolt under the radiator support, and then finally, tighten all the other bolts in place.
Thanks guys.
