| |
Click on image for the lowdown. 
====
| | |
2 members (Guitplayer, MickeyP),
70
guests, and
2
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,021 Posts1,055,356 Members48,420 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Jul 2006 Posts: 22 New Guy | | New Guy Joined: Jul 2006 Posts: 22 | Well I found the problem to be a bad ignition wire (#4 wire in the firing order). Because two wks ago, I put a nylon braid covering on each wire,it came to me a couple of nights ago that's when the problem started. So I checked each wire with an ohm meter and found the bad wire. When I pulled the boot off to put on the braided covering, I pulled the center conductor loose from the crimp w/o knowing it. Replaced the wire and loping problem stopped.
Bought me a vacuum guage and set the idle mixture best I could. But I could see that my throttle plate shaft is a little worn. Truck now runs fine for now.
I would like to replace my Rochester carb with a Carter YF series. Any thoughts where I could buy one?
Carl
Pizza40
| | |
|
|
| |
