The Stovebolt Site Forums The Shop Area Engine Shop King Pins popped right out..was it too easy?

Help is a click away!

VEHICLE
INFORMATION
KITS

at the

GM Heritage Center
All the details are here.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

1 members (carbking), 144 guests, and 4 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,186

Posts1,057,211

Members48,465

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Re: King Pins popped right out..was it too easy? #55060 01/16/2006 6:06 AM
Joined: Jul 2004 Posts: 5,708 Eureka, CA A atomarc 'Bolter
atomarc 'Bolter A Joined: Jul 2004 Posts: 5,708 Eureka, CA	46, It sounds like they are in good shape. I would clean the pin and the axle eye and do a wiggle test. The spindle bushings, wheel bearings and a worn axle eye can all add up to movement at the wheel. Read the kingpin article in the Tech Tips forum..it may answer some of your questions. Stuart

Entire Thread
Subject	Posted By	Posted
King Pins popped right out..was it too easy?	46 In Progress	01/16/2006 3:47 AM
Re: King Pins popped right out..was it too easy?	atomarc	01/16/2006 6:06 AM
Re: King Pins popped right out..was it too easy?	arnswine...	01/16/2006 6:06 AM
Re: King Pins popped right out..was it too easy?	truckernix	01/16/2006 1:31 PM
Re: King Pins popped right out..was it too easy?	46 In Progress	01/16/2006 6:58 PM

Moderated by Phak1, Woogeroo

Hop To

Link Copied to Clipboard