| |
Click on image for the lowdown. 
====
| | |
7 members (Doug Boudreaux, Jethro in Va, Possum, 1955 1 Series, Pre '68 Dave, Oswald, Bill Hanlon),
81
guests, and
0
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,197 Posts1,057,400 Members48,471 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Feb 2000 Posts: 769 Shop Shark | | Shop Shark Joined: Feb 2000 Posts: 769 | 57 vv My CCP kit rotors are 1.310, the pads are .540 and .600. Cannot measure the caliper as the tires are on. The loaded caliper should allow about .0625 to the rotor. The caliper piston will collapse enough so that the pads are contacting the caliper body. Here are some pictures of my conversion in my build pictures.
Last edited by Lonnie Gallaher; 06/24/2009 5:35 AM.
| | |
|
|
| |
