i have a 55 second series truck that i took out the 235 6 and installed a late model 350 v8 71, 72 model 350 and i got a steel bell housing for the conversion that fits the 350 and bolts to the cross member like the 235 bell housing did and im having starter problems i baught a new starter that will bolt up to the bell housing i have and etc and if i leave the starter off and get underneath i can turn the motor with my hands from the flywheel but if i install the starter and hook power to the starter it wont turn the motor the starer drive goes out and just clicks wont spin the motor and i take the new starter off and test it works great i made sure that the starter drive aint filled up witht he flywheel teeth and etc what could be my problem could i have a bad flywheel or etc???