| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,118 Posts1,056,305 Members48,439 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#50672 09/28/2005 10:10 PM | Joined: Jul 2004 Posts: 5,708 'Bolter | | 'Bolter Joined: Jul 2004 Posts: 5,708 | Chevy 50,
I installed the complete rear end, including sway bar out 72 Nova in my 51 pickup. It was many moons ago so the details aren't fresh, but with new brackets which I fabricated, it was an easy task. Look at the swap one piece at a time..it has been done a zillion times before and there is lots of info on it. Like Houston said, measure. You will see the spring width is very close..not a bolt in though.
The engine will fit...the tranny will fit. Let me tell you that the new rear end with it's car spring rates certainly doesn't do very well with the stock farm truck front suspension. I would definitely think "front clip".
Stuart. | | | |
Entire Thread
| 
will this work, engine, trans and rear end?
| chevy 50 | 09/28/2005 9:34 PM | |
Re: will this work, engine, trans and rear end?
|
Anonymous
| 09/28/2005 9:51 PM | |
Re: will this work, engine, trans and rear end?
| Wrenchbender Ret. | 09/28/2005 9:58 PM | |
Re: will this work, engine, trans and rear end?
| atomarc | 09/28/2005 10:10 PM | |
Re: will this work, engine, trans and rear end?
| caroline's truck | 09/29/2005 6:21 AM | |
Re: will this work, engine, trans and rear end?
| NM51 | 09/29/2005 5:59 PM | |
|
|
| |
