The Stovebolt Site Forums The Shop Area General Truck Talk 1952 1/2 ton - Jack, lug wrench location ?

Jimmie D has it right, bottle jack and handle, and lug wrench under the seat. Other small tools were stored under the seat in one of two styles of tool bags (this is one of the styles).

The small tools were: "a set of three open-end wrenches, a spark plug wrench, a 6” round shank screw driver, a 6” pair of pliers, and a 10 oz ball peen hammer. All of these were rust protected by plating except for the hammer which was painted. A new wheel wrench, also painted, was provided. In addition, a jack of suitable capacity - 2500 lbs for ½ and ¾ ton models, 3000 lbs capacity for one-ton models - was provided, with a jack handle for the 3100, 3600 and 3800 series jacks and a tire changing iron which also was used as a jack handle for the heavier duty models."

The small tools were made either by Vlchek or McKaig-Hatch.