| |
Click on image for the lowdown. 
====
| | |
1 members (Oswald),
112
guests, and
0
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,091 Posts1,056,038 Members48,433 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Nov 2006 Posts: 2,544 Shop Shark | | Shop Shark Joined: Nov 2006 Posts: 2,544 | You need to take it easy on pulling the shift lever back and forth so you don't break off the tip. If it was mine I would take a punch and drive the roll pin out and take the lever out of the column. Then take penetrating spray with the hose on the nozzle and spray some down into the pin that is inside the column. After spraying it a few times put the lever back in and see if it gets better. You may have to do it a few times to get it smooth. | | |
|
|
| |
