thanks 302,
yes many mods done to my wife's rig, something like 50+ to this truck. see photobucket......
the brakes were 'on sale' at Brothers http://www.brotherstrucks.com/catalog-request.asp many yrs ago. i bought the power master, taper bearings & disc kit at the same time. these were all developed by an old friend and sacto mechanic Buffalo Steve who now lives in wash state. he never did get a patend
tooooooooooo baddddddddddddd
most if not all of these kits were/are made by 2-3 companies one copied another copied another.
see the above for the adj link set up and don't forget to weld that BIG 3/4'' nut to the tie rod END . yes these use stock hubs. not sure about the master cheac W/ CCP or was that CPP. http://www.classicperform.com/
http://www.classicperform.com/NewProducts/DiscBrakeKits/FrontBrakePackage.htm
http://www.classicperform.com/tech_articles/Pedal_Power/Pedal_Power.htm

most of these trucks use::
BRAKE SET UP
1951 DELUX 5 WINDOW CHEVROLET PICK UP
MY VEHICLE IS EQUIPED W/ :
FRONT EQUIPMENT:
➢ 1971 ~ 86 CHEVROLET K – 5 / 10 BLAZER 4 WD ROTORS.
➢ 1971 ~ 87 CHEVROLET C – 10 TRUCK 2 WD (HEAVY) CALIPERS.


Last edited by carolines truck; 12/30/2008 8:20 PM.
Jim & Caroline
The highway is for gamblers, better use your good sense."
Gooday-that's my 1¢ answer due to the lousy economy ~ cause I ain't got - no . mo . doe
Every Shaver | Now Can Snore | Six More Minutes | Than Before ... | Half A Pound for Half a Dollar | Spread On Thin | Above the Collar || BURMA-SHAVE