| |
Click on image for the lowdown. 
====
| | |
0 members (),
108
guests, and
0
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,115 Posts1,056,292 Members48,439 | | Most Online14,466 Apr 26th, 2026 | | AD Chevy Trucks Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down with Ads! Again, thanks! | | | | Joined: Aug 2006 Posts: 112 Wrench Fetcher | | Wrench Fetcher Joined: Aug 2006 Posts: 112 | a 66 should have a 6 banger (292 or 250)a 283 or 327 v8...maybe, someone else will have to tell you for sure. No other engines that I know of were used. The lockout hubs are stock, I have heard but not seen non locking hubs on these. Replacement hubs are available, BUT at about 350 bucks from milemarker. My 66 does the same thing when revved up, it shouldn't, so it has a charge problem of some sort. Not a big fix, either an alternator or regulator. Simple-ist to put on a one wire alt. An original motor should have a points ign. Anything newer is better unless you are a resto guy. HEI runs and idles so much better AND everyone has forgotten how to use a dwell meter for setting points. Hope this helps.
64 & 66 GMC long fleetside 4x4 Cartwright, OK
| | | |
Entire Thread
|
1966 4x4 engine, hubs, springs ?
| wilkinst | 12/24/2008 7:38 PM |
Re: 1966 4x4 engine, hubs, springs ?
| Fireballv8 | 12/27/2008 1:22 AM |
Re: 1966 4x4 engine, hubs, springs ?
| Big Tan | 12/27/2008 1:27 PM |
Re: 1966 4x4 engine, hubs, springs ?
| 53moneypit | 12/27/2008 6:21 PM |
Re: 1966 4x4 engine, hubs, springs ?
| Fireballv8 | 01/02/2009 12:23 AM | |
| |
| |