| |
Click on image for the lowdown. 
====
| | |
1 members (stoveboltgator),
218
guests, and
0
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,048 Posts1,055,540 Members48,425 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#48229 07/26/2005 9:00 AM | Joined: Aug 2004 Posts: 399 Shop Shark | | Shop Shark Joined: Aug 2004 Posts: 399 | Can be done in 30 Minutes without removing the whole stuff.
All you need is a new gasket and some silicone.
Unscrew the ring that hold the Bell and push it toward the rear end. Remove bolts from the u-joint and the torque tube dropps down. Degrease everything bevore U use the silicone. Good time to do the cork seal of the bell to.
Frank | | |
|
|
| |
