| |
Click on image for the lowdown. 
====
| | |
10 members (Bill Hanlon, pdlightning, 1955 1 Series, dt235sd, mo2cyl, FAST55, Steelonsteel, MikeE, sron48, klhansen),
75
guests, and
3
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,050 Posts1,055,667 Members48,426 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Dec 2003 Posts: 2,733 Shop Shark | | Shop Shark Joined: Dec 2003 Posts: 2,733 | I would use a variable speed jig saw with a fine tooth metal cutting blade. I would NOT use a recipro saw because they are too big to handle in that small area and the blades are too long.
Whatever you do use be certain first that the area below the hump cut is clear. Wear safety glasses no matter the method or tool. I know, I know...but safety pays and second chances don't come around too often. | | |
|
|
| |
