I know we have a couple of hydraulics guys out there. Any ideas on hooking up a later model hydroboost system if I'm not going to put power steering in?

Here's the normal installation

PS pump high pressure to HydroBoost
HB high pressure to Steering Gear
HB low pressure to PS pump
SG low pressure to PS pump

special pumps are used that have two return lines

Can I send the HB high pressure output through hydraulic hose that is double clamped to return it to the pump through the second return nipple? Is there a valve I can use to lower the pressure and return it to the pump. Should I have a high pressure fitting welded into the PS pump resevoir to return the HP output from the hydroboost unit?

Thanks,
Chris