Here are three pictures of the aluminum reservoir I'll be using as a remote one. It is the master cylinder reservoir from GM application, probably P30 chassis or medium duty truck, I've seen them on both. It needs to be Drilled and tapped for 1/8" NPT to use as a remote reservoir, and one other small hole needs to be plugged.

http://good-times.webshots.com/photo/2478561670080251109bUAKQl
http://good-times.webshots.com/photo/2534098880080251109rcMScP
http://good-times.webshots.com/photo/2547773260080251109bsdgrp

I was unable to purchase just the reservoir or even the lid from any auto parts store, only way to get one is buy an entire rebuilt master cylinder ($$$), or get a used one from a junk yard.

Grigg

•1951 GMC 250 in the Project Journals
•1948 Chevrolet 6400 - Detroit Diesel 4-53T - Roadranger 10 speed overdrive - 4 wheel disc brakes
•1952 Chevrolet 3800 pickup
---All pictures---
"First, get a clear notion of what you desire to accomplish, and then in all probability you will succeed in doing it..." -Henry Maudslay-