| |
Click on image for the lowdown. 
====
| | |
1 members (Hotrod Lincoln),
72
guests, and
0
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,049 Posts1,055,680 Members48,426 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#44409 02/27/2004 1:01 AM | Joined: Mar 2003 Posts: 23 Junior Member | | Junior Member Joined: Mar 2003 Posts: 23 | Hi there,
I swapped a 283 in place of a 235 in my '62 Belair. It was very easy & I'm pleased with results. Your truck will be a little different. I'm sure others will chime in with things I missed, but I'll give you the basics.
1. Need to make/buy crossmember for motormounts.
2. Need correct bellhousing for smallblock. They are cheap & easy to find.
3. Clutch pivot from block to frame should have removable extension? My '62 Belair had this.
4. Check radiator clearance. Probably need a better rad anyway.
5. Is your truck still 6volt? Your V8 will need 12V.
6. New exhaust.
7. Modify throttle linkage.
Good luck on the swap.
Scott
Scooter
I am a total control freak. I shift for myself. No auto's!
1948 1 ton 5 window w/235
1951 1.5 ton dump w/235
1966 3/4 fleetside w/283
1962 Bel Air 235 w/OD
& one rusty,beat up,240K mile '82 Chevy 3/4 ton
| | |
|
|
| |
