| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,029 Posts1,055,417 Members48,422 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: May 2005 Posts: 86 'Bolter | | 'Bolter Joined: May 2005 Posts: 86 | Just installed my rebuit axle/torque tube in my 51 1/2 ton chassis.
I ran a plumb line down the centerline of the chassis. The torque tube at the u joint end is off the centerline by about 3/4". After more measurements it looks like the rear axle is about 1/8" forward at the outside edge of one side. The rear axle is located properly on the rear spring spuds(clamping bolt head). These are original springs. Is this condition acceptable?? or is there a way to correct to get the torque tube directly inline. The u joint has enough movement to align the transmission to the torque tube.
The frame measures up square.
Mike
1951 Chevy 1/2 ton w/ 1959 235
1971 Chevelle
| | |
|
|
| |
