| |
Click on image for the lowdown. 
====
| | |
2 members (dt235sd, ndkid275),
101
guests, and
1
robot. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,211 Posts1,057,469 Members48,473 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Mar 2004 Posts: 874 'Bolter | | 'Bolter Joined: Mar 2004 Posts: 874 | The 1/2 ton TF rear spring pad spacing is very close to the 3/4 ton AD and will bolt in with no mods.
I considered this swap on my '52 3600. However the pad inclination on the TF rear may not give you the exact pinion angle you want for the AD. Make sure you check it. You could shim it if you don't want to mess with relocating the pads. | | |
|
|
| |
