| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,139 Posts1,056,448 Members48,441 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Jun 2004 Posts: 8,597 Riding in the Passing Lane | | Riding in the Passing Lane Joined: Jun 2004 Posts: 8,597 | The installation is the same but some modifications have to be made. The front of the input shaft & the front brg retainer have to be shortened to match the old trans. The mounting holes have to be drilled out to 1/2 in. The splines on the front shaft have to be ground so the disc will slide on 1/2 in further. You should put a crossmember under the trans. with a mount. Use a fine spline yoke from practically any 68 up chev. & have the drive shaft modified to fit. There has been many posts on this in this forum. You can get more info doing a search & in the Tech Tip section
They say money can't buy happiness. It can buy old Chevy trucks though. Same thing. 1972 Chevy c10 Cheyenne SuperIn the Gallery Forum | | |
|
|
| |
