| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,076 Posts1,055,924 Members48,430 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Dec 2006 Posts: 1,464 Shop Shark | | Shop Shark Joined: Dec 2006 Posts: 1,464 | Russell;
There should be shims between the axle and the leaf spring. Any spring shop and most FLAPS should have them. I believe the factory put in about 3 degrees of caster so ask for 3 degree shims (one for each side). Install the shims with the wide end at the rear side of the axle, the narrow end towards the front.
This should help your problem. | | | |
Entire Thread
|  
Wheels, tires, and steering
| Russell | 06/22/2008 12:25 AM | |
Re: Wheels, tires, and steering
| waldo53 | 06/22/2008 12:49 AM | |
Re: Wheels, tires, and steering
| LONGBOX55 | 06/22/2008 1:18 AM | |
Re: Wheels, tires, and steering
| Lonnie Gallaher | 06/22/2008 1:56 AM | |
Re: Wheels, tires, and steering
| Czechman | 06/22/2008 1:04 PM | |
Re: Wheels, tires, and steering
| Joe H | 06/22/2008 2:52 PM | |
Re: Wheels, tires, and steering
| Hotrod Lincoln | 06/22/2008 6:17 PM | |
Re: Wheels, tires, and steering
| Wrenchbender Ret. | 06/22/2008 8:59 PM | |
Re: Wheels, tires, and steering
| Hotrod Lincoln | 06/22/2008 9:21 PM | |
Re: Wheels, tires, and steering
| Russell | 06/23/2008 11:36 PM | |
Re: Wheels, tires, and steering
| starkweatherr | 07/09/2008 4:58 PM | |
|
|
| |
