| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,095 Posts1,056,480 Members48,444 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Dec 2001 Posts: 141 Wrench Fetcher | | Wrench Fetcher Joined: Dec 2001 Posts: 141 | The cheapest way to change the fronts is with a spindle swap; you can buy aftermarket spindles - that's the best way - or get used ones, but if you get used ones you will have to remove all the shims and you won't be able to get the caster right because the angles are different due to the lower control arms being closer inboard on the later model truck. The cheapest way to change the rears is to change out axles, but good luck finding someone to sell just axles.
What I did was to find a junk '75 1/2 ton and changed out the crossmember and rearend; you have to do a little work, but it all fits good. | | |
|
|
| |
