| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,204 Posts1,057,288 Members48,467 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: May 2004 Posts: 1,312 'Bolter | | 'Bolter Joined: May 2004 Posts: 1,312 | I've seen it done on TV. They basically cut the fender at the high radius point, and welded a 3" piece of spacer metal in between the two old sections. This will give you a flat spot unless you precurve the spacer metal. Running boards would have to be sectioned lengthwise to match so curves on fender and board still match. Pretty tricky metalwork unless you are a bodyman. You can purchase fibreglass fenders which are 2" wider than stock. Not sure how they handle the running board issue. | | |
|
|
| |
