| |
Click on image for the lowdown. 
====
| | |
1 members (baldeagle),
158
guests, and
2
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,110 Posts1,056,241 Members48,437 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Nov 2001 Posts: 58 Member | | Member Joined: Nov 2001 Posts: 58 | FoxJ, have a look at this picture from my 38 I think the frames and heights will be similar. These are stock spindles and at the end of the frame the height is about 12-13 inches. That's without the motor or full radiator etc.etc. Adding all the running gear, fluids and sheet metal will bring it down to approx. 9-10. If you used the extra 2 inch drop spindles, your truck will probably be hitting every bump in the road. http://community.webshots.com/photo/26859003/41133100InrrlQ | | |
|
|
| |
