| |
Click on image for the lowdown. 
====
| | |
7 members (Shade Baby, Pete1946, frogfarmer, baldeagle, 1955 1 Series, Jon G, 1 invisible),
97
guests, and
8
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,106 Posts1,056,213 Members48,436 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Jul 2004 Posts: 5,708 'Bolter | | 'Bolter Joined: Jul 2004 Posts: 5,708 | Dan,
You have it figured correctly on the line to the center oiler (rockers). You will have to purchase a new one when it's time to reinstall.
The road draft tube should have one small screw on a small bracket, then some gentle work with a dead blow hammer and it should come out. It is a tight fit in the block and years of crud doesn't help the situation. The twist & wiggle routine as you pull outward usually gets the job done.
Stuart | | |
|
|
| |
