Does anyone have a good picture of how & where the throttle cable should be hooked up to the carb and/or linkage? If not, a good description would help. My is disconnected and I would like to fix it.

There is a bracket on the carb that has two hold-down screws; one for a cable to hook to the carb for the choke. I assume the other, which makes the cable face downward is for the throttle. The only place I can find that it might hook up to is the throttle linkage that hooks to the carb but the tab is about 12" lower than the carb. I believe this would cause it to interview with the pedal inside the cab.

Any help is appreciate!