| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,042 Posts1,055,595 Members48,426 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#37133 07/27/2004 4:03 AM | Joined: Jun 2000 Posts: 2,773 'Bolter | | 'Bolter Joined: Jun 2000 Posts: 2,773 | Best way to prep a diffy is to powerwash. Last one I cleaned I first scraped all the gunk of I could, then attacked it with degreaser mixed with hot water and a wire brush. (I don't own a powerwasher). Followed with zinc phosphate etch, then I sprayed on Rustoleum black hammered finish rust encapsulating paint. Krylon and Hammerite also make similar paints, Hammerite also has it in a smooth finish. These paints are similar to the Por-15, but not as nasty to work with. I did this last summer and drove through a very salty winter, so far no rust has appeared.
Fred
52 3600
69 C-10
| | |
|
|
| |
