| |
Click on image for the lowdown. 
====
| | |
2 members (Hush, Otto Skorzeny),
122
guests, and
1
robot. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,034 Posts1,055,540 Members48,425 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Sep 2003 Posts: 72 Wrench Fetcher | | Wrench Fetcher Joined: Sep 2003 Posts: 72 | Hi,
I have a column from a 77 GMC 1/2 ton in my GMC 1/2 ton and I fabbed some mounting brackets for under the dash that mount to the stock 77 bolt holes. Only problem is there is alot of vertical play with the steering wheel. I want it to be solid.
I was looking at the column and see that it is 3 seperate pieces just down from the steering wheel. One with the signal and ignition in it, another with the shifter in it and the third has nothing in it. I thought if I took off the bottom piece I would be able to make the mount more solid onto the dash. Possibly using the place where the original column was bolted into.
Has anyone ever taken apart a column from a 77 and if so could you tell me how to take off the bottom part.
Or if anyone has a better mounting idea that would be great. Thanks.
kskt4 | | |
|
|
| |
