| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,196 Posts1,057,385 Members48,469 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#36540 10/08/2002 1:03 AM | Joined: Sep 2001 Posts: 29,270 Bubba - Curmudgeon | | Bubba - Curmudgeon Joined: Sep 2001 Posts: 29,270 | 49 geezer, I spent way too much at Jegs and Baker Precision (after asking for advice, with no luck): http://www.jegs.com/cgi-bin/ncommerce3/ProductDisplay?prrfnbr=1825&prmenbr=361 http://www.bakerprecision.com/adapt5.htm A few weeks ago I went to Pep Boys and near their electric radiator fan display was an adpter set with hoses and fittings for less than $25. 1/2" NPT is the size of the holes in the block. You do not need high pressure hoses or fittings 100-150 psi should work fine. I attached the oil pressure "sender" on the output side of the spin-on filter head. Let me know if you want a few pictures posted. Tim | | | |
Entire Thread
| 
Is any one familiar with full flow oiling, including to hydraulic lifters.
| lusty1 | 10/03/2002 4:37 AM | |
Re: Is any one familiar with full flow oiling, including to hydraulic lifters.
| tclederman | 10/03/2002 5:37 PM | |
Re: Is any one familiar with full flow oiling, including to hydraulic lifters.
| bznhafdzn | 10/04/2002 5:38 PM | |
Re: Is any one familiar with full flow oiling, including to hydraulic lifters.
|
Anonymous
| 10/06/2002 4:53 AM | |
Re: Is any one familiar with full flow oiling, including to hydraulic lifters.
| 49 geezer | 10/07/2002 10:00 PM | |
Re: Is any one familiar with full flow oiling, including to hydraulic lifters.
| tclederman | 10/08/2002 1:03 AM | |
Re: Is any one familiar with full flow oiling, including to hydraulic lifters.
| Mechainiac | 10/08/2002 3:06 AM | |
Re: Is any one familiar with full flow oiling, including to hydraulic lifters.
| 49 geezer | 10/08/2002 10:13 PM | |
Re: Is any one familiar with full flow oiling, including to hydraulic lifters.
| 49 geezer | 10/08/2002 10:27 PM | |
Re: Is any one familiar with full flow oiling, including to hydraulic lifters.
| tclederman | 10/08/2002 11:20 PM | |
Re: Is any one familiar with full flow oiling, including to hydraulic lifters.
| lusty1 | 10/11/2002 5:19 PM | |
Re: Is any one familiar with full flow oiling, including to hydraulic lifters.
| tclederman | 11/25/2002 4:42 AM | |
Re: Is any one familiar with full flow oiling, including to hydraulic lifters.
| sixpack | 11/25/2002 2:25 PM | |
|
|
| |
