Chances are, it'll crack out just a little after you finish. I V'd the cracks, applied JB in some and a 2 part in others, sanded, primed, and painted with plain old plastic paint.

Started with this (click to enlarge pics)…

[IMG]http://img.photobucket.com/albums/v228/Avette4me/My%2058/Steering%20wheel/th_new-tome.jpg[/IMG]

Sand the entire wheel and V out the cracks

[IMG]http://img.photobucket.com/alb...%20wheel/th_grooveoutthecracks.jpg[/IMG]

[IMG]http://img.photobucket.com/albums/v228/Avette4me/My%2058/Steering%20wheel/th_groove2.jpg[/IMG]

Save yourself a little sanding and smooth the epoxy or JB with a little spit before it gets hard – kind of like caulk..

[IMG]http://img.photobucket.com/alb...20wheel/th_smoothitoffwithspit.jpg[/IMG]

I sanded and painted with a simple can of Krylon plastic paint – been on close to a year now and the paint is still excellent.

[IMG]http://img.photobucket.com/albums/v228/Avette4me/My%2058/Steering%20wheel/th_closeup.jpg[/IMG]

[IMG]http://img.photobucket.com/alb...teering%20wheel/th_driversside.jpg[/IMG]


The big picture
1958 Chevrolet Stepside in the Gallery
Photobucket album