| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,026 Posts1,055,406 Members48,422 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#34355 05/07/2002 8:21 PM | Joined: Jun 2000 Posts: 2,773 'Bolter | | 'Bolter Joined: Jun 2000 Posts: 2,773 | My truck had an 11" clutch when I bought it. Still running the 6 volt starter on a 12 volt system, no problems with that. The problem comes with clearance when installing the fork in the bell housing. You will probably need a shorter ball stud. Mine was assembled the way I learned in high school where you loosen the bell housing bolts as far as possible, slip in the fork, then tighten the bolts with an open end wrench 1/12 of a turn at a time. Ugh!
Fred
52 3600
69 C-10
| | |
|
|
| |
