yes, 53panel is right. The two rear mounts are acually tranny based. And yes, 2 of the four tranny mounts face from the front, and then two from the back. Sounds like he's pulling all as a unit, so not an issue. southern charm, you'll find that you have very little clearance to lift the unit "straight up", as the top of the bellhousing will hit the floor pan - possibly ripping or bending it. You need to watch this very closely, while having a buddy work the hoist. For every 1/2 inch you lift vertically upward, you need to move about an inch forward until the bellhousing is clear of the floor pan. Good Luck
