| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,043 Posts1,055,605 Members48,426 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Nov 2002 Posts: 1,002 Shop Shark | | Shop Shark Joined: Nov 2002 Posts: 1,002 | I just checked the cable I pulled out of my 63. The nuts will slip off both ends. If your housing and cable is not coming out of the speedo gear I'd disconnect the cable at the speedometer and any clamp in between. This should allow you to pull the cable housing away from the gear. Now the question is there hardened grease holding the inner cable in the gear or rust. Used a pair of needle nose pliers and see if you can work the square end of the cable out. If not try some carb cleaner or penetrant to loosen it. Hope that helps
Larry
Last edited by LGriffin; 11/17/2007 5:46 AM.
I don't own a vehicle that isn't old enough to drink.
| | |
|
|
| |
