| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,040 Posts1,055,478 Members48,424 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Jun 2006 Posts: 49 Wrench Fetcher | | Wrench Fetcher Joined: Jun 2006 Posts: 49 | Bobhas it right. You need to bend the frame to match the door shape. It is also important that you put the "spacers" under the panel. There are two. Both rectangular in shape. They are about a half inch wide, maybe 2 inches long, and about a 1/" thick. One is glued (use 3m adhesive) just above the triangular piece of the remote control arm. The other goes vertically at the latch side of the long hole. These keep the remote control arm from rubbing against the cardboard. BTW, if you spray the back of the cardboard with clear coat or even paint, it'll withstand humidity a lot better. | | |
|
|
| |
