Hey Scott nice mug!!! Hope this is the correct place to post for the contest.
My entry is simple but something I found that most would never know.I wanted to put mirrors on both doors of my 61 and 60 half ton trucks and was trying to figure how to place and drill holes for proper aligned location so I took a door from a donor truck apart,I actually removed everything,glass,window regulator,door lock and link,and finally removed the outer door skin and was suprised to find the nuts already welded in place for the mirror.I have been working on these trucks since they came out in late fifties and had no idea that the doors come from the factory with those nuts already there.I suppose they put them in at the factory so they could add the optional right side mirror without to much trouble,just drilling the door skin and BAM a second mirror.SOOOOOO if anyone is looking to add that right side mirror and you want to get it in the right location just take the inner door panel out and feel back in there at the location for the mirror and you will find the weld nuts and that makes it simple to locate that second mirror to your truck.I checked all of my trucks and they are there!!!!!Hope this post helps someone.
