| |
Click on image for the lowdown. 
====
| | |
0 members (),
254
guests, and
2
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,094 Posts1,056,066 Members48,433 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Apr 2005 Posts: 261 Wrench Fetcher | | Wrench Fetcher Joined: Apr 2005 Posts: 261 | phlattruck I can tell you what goes where if the parts you have are the original Chevrolet bumper parts. There are two frame extension brackets for each side; the top one has a double bend and the bottom one has a single bend. The rear bumper face bar has a full width attaching bar between the face bar and the frame extensions. Your tailgate will hit the top of the bumper if you let it drop down without the chains. 99% of the pickups did not get a rear bumper (extra cost option) 99% of the panel trucks did have them.
34 & 35 trucks are the greatest
| | |
|
|
| |
