| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,059 Posts1,055,820 Members48,426 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#29142 08/06/2003 2:52 AM | Joined: Feb 2001 Posts: 1,897 Member | | Member Joined: Feb 2001 Posts: 1,897 | I am almost betting on valve contact with the piston or cylinder wall. With the 1.6 rockers and the high lift cam you are cutting things REAL close.
I am trying to remember if the top edge of the cylinder has to be notched with the big valve/cam-lift and long-rockers
There is enough good in the worst of us and enough bad in the best of us that it does not behoove any of us to criticize the rest of us.
-
-
Be yourself. If you are ever lost, It will be much easier to find yourself if you know who you are!
| | |
|
|
| |
