| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,090 Posts1,056,345 Members48,442 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Apr 2004 Posts: 219 Shop Shark | | Shop Shark Joined: Apr 2004 Posts: 219 | sub65,
You've got to use the "long box" 1/4's.
They have to be cut to fit. You've got to order the R/fnt, R/rear, L/fnt & L/rear. The front 1/4 sections have to be cut & shortened. Cut the front 1/4 sections about 6" back from the door jamb. cut out the correct amount of the 1/4 & splice back together. This will give you the lip you need at the door jamb. Click on my webshots link below to see. Hope this helps!!
Jim Sgrig | | |
|
|
| |
