For permanent bonding, Loctite is the finest thing available. It is resistant to water, diesel fuel, gasoline, antifreeze, hydraulic fluids, motor oil and transmission fluids and major shop fluids.
For an on-line Loctite Product Guide check out http://www.Loctite.com.au/products.htm
According to "Loctite adhesive/sealant product selector." The technical features are:-

#609 [product no. 60931] (601 in UK)

for retaining bearings, bushings, and sleeves.
Green colour.
Viscosity cP 100-150;
gap filling ability w/o primer, 0.005 inch;
sheer strength 3,000 psi;
temperature range -65 to 300 degrees F.;
full cure w/o primer 6 hrs; full cure w/ primer 1 hr. (to mount a component on a shaft they indicate that it will work with anything from a "press fit" to a slip fit of two to four thou)

"The Operation of GMC trucks is normally smooth and steady, with no loud rattling, knocking or unusual noises. A good driver will quickly become accustomed to driving a GMC truck and will get the feel of his vehicle regardless of his engineering knowledge."-TM10-1563