| |
Click on image for the lowdown. 
====
| | |
0 members (),
40
guests, and
2
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,030 Posts1,055,428 Members48,422 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#23540 02/25/2002 10:14 PM | Joined: Oct 2001 Posts: 194 Wrench Fetcher | | Wrench Fetcher Joined: Oct 2001 Posts: 194 | Float bowl edge could be warped. Lay a small sheet of glass on your workbench, put a full sheet of very fine sandpaper on the glass, (grit side up) turn you float bowl upside down and "sand the edge" Make sure you keep the float bowl flat against the paper and glass. Check your progress very often, just as soon as bright metal shows around the entire edge stop. Sometimes just a few strokes will correct the problem. | | |
|
|
| |
