| |
Click on image for the lowdown. 
====
| | |
8 members (‘37ChevyPU, Hotrod Lincoln, Otto Skorzeny, CuzzFuzz, Shaffer's1950, SlimSix, TrknGMC, 1 invisible),
81
guests, and
3
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,139 Posts1,056,451 Members48,441 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#22357 06/13/2004 11:04 AM | Joined: Feb 2004 Posts: 110 Wrench Fetcher | | Wrench Fetcher Joined: Feb 2004 Posts: 110 | Chevyboy,
Measure the clutch discs and see if they are the same diameter. If so and the spline is the same, then it should fit. Cast iron is easy to drill and tap, if the area your are making another whole in is the thicker (re-inforced) area. Also, I have taken out transmissions many times in the last 50 years that had a bolt missing and you could tell it had been gone for a long time. For a temporary set-up, I would go for three.
Truck Tinker | | |
|
|
| |
