| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,080 Posts1,055,951 Members48,430 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Nov 2006 Posts: 26 Junior Member | | Junior Member Joined: Nov 2006 Posts: 26 | Being new here, i read a little bit but didn't see any particular place for sightings. I could have missed it so if I'm out of place,please let me know. Anyway, here's some pics I shot while looking around today. Junk yards are a riot. http://www.fiberglassics.com/0/truck/sightings/DSC00003.jpg http://www.fiberglassics.com/0/truck/sightings/DSC00004.jpg http://www.fiberglassics.com/0/truck/sightings/DSC00005.jpg http://www.fiberglassics.com/0/truck/sightings/DSC00006.jpg http://www.fiberglassics.com/0/truck/sightings/DSC00007.jpg While on a hunt for some wheels, I figured I'd pick up a 16in dually wheel to see what fits what. Well, typical 16 in wheels will fit the front of the 47 1 tonner, but surely not the rear end. The bolt pattern and center 4.5 in hole are ok, but the inner diameter must be 17 inches or more... so what wheels to use. To me, 20's will be too big. Any suggestions? I really want to get away from the Split rims, but then again, I may just put a modern rear end under the thing then typical wheels will work just fine. | | |
|
|
| |
