Thanks but the Brother's site does not, at least that I saw, give instructions as to what lines to run to the front or rears. In fact the most I got out of that site was their patting themselves on the back for installing another access hole to help fill the M/C. Hate to tell them there's a door available that gives complete, unrestricted access and is a much cleaner install..oh well. I'm under the impression that one line goes to three wheels and one to one wheel on a single M/C while a dual requires one line to the two front wheels and one line to the rear wheels. I'll be running all new brake lines so I need to know the placement of "T" and other fittings. With so much of this being done it should be recorded somewhere. Can somebody whose done this give simple instructions? Thanks.
