The Stovebolt Site Forums The Shop Area General Truck Talk Steering Box rebuild

Part Numbers:

Sector shaft seal (pitman arm side of box): CR 11055 (chicago rawhide @ NAPA)

Side cover bushing: GM-266316 (dealership)

Adjustment Screw (aka side lash adjusting screw and shims): GM-605142 (dealership)

For the upper and lower bearings, pull the bearings from the box, take them to napa and they can cross reference them using the numbers stamped into the bearing/race.

Napa may also be able to cross the side cover bushing and adjustment screw.

For the side cover gasket, just use gasket material and an exacto to cut to fit. The gasket I got was the wrong size with my 'kit' was too small so thats what I had to do.